PRODUCT: Desk top day planner pad printed direct to plate in 4 color process plus Spot Varnish, face side only, shrink-wrap and box in packs of 25.
TITLE: FY’2016/17 DESKTOP DAY PLANNER
FORM NUMBER: M-517/16
QUANTITY: 200,000 Desk Top Day Planner Pad (FIRM)
PLUS: 50 Quality Assurance Sample Desktop Planner — 17 Department Sample Desktop Planner—5 Samples
Trim size: Day Planner Sheets 21–3/4 x 14-1/4″
Base sheets=21-3/4 x 17″
Chipboard backing=21-3/4×17″
STOCK/PAPER:
Day Planner sheets – L0160 White Offset Book, basis weight: 70lbs per 500 sheets, equal to JCP Code A60.
Base Sheet – Litho Coated Cover (C1S), White, 12 Pt. (JCP L70)
Backing – Chipboard @ 22 pt. Thick
Book Cloth – Black, 1-5/8″ wide strip.
VARNISH: A “low rub” spot varnish required over all full color illustrations and color builds.
PRINTING: Each day planner sheet (12) and Base sheet prints face only in 4 color process. The Base Sheet prints face only the bottom portion (2-3/4″ x 21-3/4″).
FORMAT: Day Planner: Day Planner Sheets July 2016 thru June 2017, a 13th sheet (Base Sheet) to be collated in sequence, padded (top edge) with black book cloth and chipboard backing (22 pt. thick). Follow files for color breaks.
MARGINS: 12 day planner sheets/page, all pages bleed all 4 sides. Base Sheet Bleeds 3 sides.
PERFORATION: There is one (1) requirements as listed below:
•1. Day Planner Sheets – Perforate once, with a full horizontal perforation along the 21-3/4″ dimension, ¾” from the top edge.
Trim 4 sides. Collate day planner sheets July 2016 thru June 2017, Base Sheet and backing chipboard and bind with four (4) wire stitches @ 7-1/4″ center to center and 1/4″ center to edge along the 21-3/4″ top dimension, through the sheets and chipboard. After wire stitching, cover along the bind edge with a 1-5/8″ X 21-3/4″ strip of black book cloth, lapping equally @ approximately 11/16″ over the top sheet and wrapping around the top edge to lap over the chipboard. Cloth strip must be firmly glued in place.
Die cut four (4) ¾” slits on the lower right side of the base sheet to house a business card. Follow files for position.
Apply two (2) 1″ X 1″ patches of double sided tape on the chipboard, one patch on the left side @ 1-1/4″ from the left trim edge and one on the right side @ 1-1/4″ from the right trim edge. Position both patches approximately @ 1-1/2″ from the bottom. NOTE: End user will expose double sided tape adhesive and fasten base sheet to backing sheet, after inserting business card.
Global Contact International 